![]() ![]() If that doesn't do the job do this where line hooks onto each injector. One will loosen line and watch while other cranks vehicle until you get fuel and tighten line before the other person releases ignition switch unless vehicle starts first. If does not have electric fuel pump will need a second person. If this vehicle has an electric fuel pump loosen line where fuel enters injection pump then turn ignition key to the on position and watch for fuel to appear and then quickly tighten line before turning off key. What happens is there is air in the system. SOURCE: ran out of diesel now vehicle won't start More reasons and solutions, please see at: If no oil is supplied after removal, the intake pipe and oil pump shall be inspected. Check that the inlet pipe is leaking, and that the filter screen on the inlet joint is blocked. ![]() Oil pump does not supply oil or intermittent oil supply. ![]() Loosen the nut of the high pressure tubing at one end of the injector, pry high injection pump plunger spring seat, when there is no bubble in the fuel out of the nozzle, spin the nut, then pry a few more times, so that each cylinder injector is filled with fuel.Ģ. Pump oil again, when there is return oil in the tubing, then tighten the hand pump. First unscrew the exhaust screws on the injection pump and the fuel filter and pump the oil with the hand pump until there are no bubbles in the spilled fuel. Here is some reasons and solutions for diesel generator fail to start:Ĭheck if the fuel line connection is loose and remove air from the fuel system. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |